virtual access GW1000M Series User Manual

25: Automatic operator selection
_______________________________________________________________________________________________________
_____________________________________________________________________________________________________
© Virtual Access 2017
GW1000 Series User Manual
Issue: 1.9 Page 197 of 350
Figure 104: The mobile manager page
There are three sections in Mobile Manager.
Basic settings
Configure SMS, select roaming SIM and collect ICCCIDs.
Callers
Configure callers that can use SMS.
Roaming Interface
Template
Configure common values for interface created by Automatic Operator Selection.
25.2.2.1 Basic settings
Web Field/UCI/Package Option
Description
Web: SMS Enable
UCI: mobile.main.sms
Opt: sms
Enables SMS.
no
Disabled.
yes
Enabled.
Web: Collect ICCIDs
UCI: mobile.main.init_get_iccids
Opt: init_get_iccids
Enables or disables integrated circuit card identifier ICCID’s
collection functionality. If enabled then both SIM 1 and SIM 2
ICCIDs will be collected, otherwise it will default to SIM 1. This
will be display under mobile stats
no
Disabled.
yes
Enabled.
Web: PIN code for SIM1
UCI: mobile.main.sim2pin
Opt: sim2pin
Depending on the SIM card, specify the PIN code for
SIM 1.
Web: PIN code for SIM2
UCI: mobile.main.sim2pin
Opt: sim2pin
Depending on the SIM card, specify the PIN code for
SIM 2.
Web: HDR Auto User ID
UCI: mobile.main.hdr_userid
Opt: hdr_userid
AN-PPP user ID. Supported on Cellient (CDMA) modem only.
Table 66: Information table for mobile manager basic settings

virtual access GW1000M Series Specifications

General

Brand	virtual access
Model	GW1000M Series
Category	Network Router
Language	English