26: Configuring IPSec
_______________________________________________________________________________________________________
_____________________________________________________________________________________________________
© Virtual Access 2017
GW1000 Series User Manual
Issue: 1.9 Page 233 of 350
26.4.2 Configure connection settings
Scroll down to view the connection settings section.
If you want to create a DMVPN, you do not need to configure all settings as the DMVPN
will automatically create them using the template. Leave the following sections blank:
Remote GW Address
Local ID
Remote Id
Local LAN IP Address
Local LAN IP Address Mask
Remote LAN IP Address
Remote LAN IP Address Mask
To Next Page
Loading...