virtual access GW1000M Series - Page 276

28: Configuring SNMP
_______________________________________________________________________________________________________
_____________________________________________________________________________________________________
© Virtual Access 2017
GW1000 Series User Manual
Issue: 1.9 Page 276 of 350
config 'access' 'private_access'
option group 'private'
option context 'none'
option version 'any'
option level 'noauth'
option prefix 'exact'
option read 'all'
option write 'all'
option notify 'all'
28.3.7 SNMP traps settings
28.3.7.1 SNMP trap using UCI
snmpd.@trapreceiver[0]=trapreceiver
snmpd.@trapreceiver[0].host=1.1.1.1:161
snmpd.@trapreceiver[0].version=v1
snmpd.@trapreceiver[0].community=public
SNMP trap using package options
# for SNMPv1 or v2c trap receivers
config trapreceiver
option host 'IPADDR[:PORT]'
option version 'v1|v2c'
option community 'COMMUNITY STRING'
# for SNMPv2c inform request receiver
config informreceiver
option host 'IPADDR[:PORT]'
option community 'COMMUNITY STRING'
An additional option was added to the 'agent' subsection:
option authtrapenabled '0|1