virtual access GW1000M Series User Manual

35: Event system
_______________________________________________________________________________________________________
_____________________________________________________________________________________________________
© Virtual Access 2017
GW1000 Series User Manual
Issue: 1.9 Page 320 of 350
va_eventd.@forwarding[0].eventName=LinkUp
va_eventd.@forwarding[0].severity=warning-critical
va_eventd.@forwarding[0].target=syslog1
35.7.4 Forwarding using package options
root@VA_router:~# uci export va_eventd
config forwarding
option enabled ‘1’
option className ‘ethernet’
option eventName ‘LinkUp’
option severity ‘warning-critical’
option target ‘syslog1’
35.7.5 Forwarding table options
UCI/Package Option
Description
UCI: va_eventd.<forwarding
label>.enabled
Opt: enabled
Enables or disables event generation.
0
Disabled.
1
Enabled.
UCI: va_eventd.<forwarding
label>.className
Opt: className
Only generate events with the given className. Available class
names can be viewed using 'vae_cli -d' command.
ClassName
internal
mobile
ethernet
isdn
power
usage
pvc
l2tp
auth
ipsec
wifi
ppp
adsl
system
ntp
UCI: va_eventd.<forwarding
label>.eventName
Opt: eventName
Only generate events with the given className and the given
eventName. The eventName is optional and can be omitted.

virtual access GW1000M Series Specifications

General

Brand	virtual access
Model	GW1000M Series
Category	Network Router
Language	English