virtual access GW1000M Series - Page 341

36: Configuring SLA reporting on Monitor
_______________________________________________________________________________________________________
_____________________________________________________________________________________________________
© Virtual Access 2017
GW1000 Series User Manual
Issue: 1.9 Page 341 of 350
The following graph options are available in the drop-down menu in the name column:
 Error Count (Average)
 Signal Strength (Average)
 Error Count (Max)
 Signal Strength (Max)
 Error Count (Min)
 Signal Strength (Min)
 Bytes Transmitted
 Bytes Received
 Bytes Transmitted over Received
 Online time
 Temperature (Min)
 Temperature (Max)
 Temperature (Average)
Select a graph name and then select a relevant range from the following options:
 Year
 Month
 Week
 Day
Click Add and when you have selected all graphs, click Save.
View reports
To view a report, in the header menu, select Statistic Reports.
From the drop down box, select the relevant report and click Generate. The report
appears.
Figure 169: Example of a completed report