virtual access GW1000M Series User Manual

37: Configuring SLA for a router
_______________________________________________________________________________________________________
_____________________________________________________________________________________________________
© Virtual Access 2017
GW1000 Series User Manual
Issue: 1.9 Page 347 of 350
Figure 172: The SLA daemon page
Web Field/UCI/Package Option
Description
Web: Enable
UCI: slad.main.enable
Opt: Enable
Enables or disables SLAD application.
0
Disabled.
1
Enabled.
Web: Roundtrip Timeout (ms)
UCI: slad.main.roundtrip_timeout_msec
Opt: roundtrip_timeout_msec
Specifies the time in milliseconds that a packet is not replied
before this timeout expires and is considered as lost.
0
Disabled.
1
Enabled.
Web: Interface
UCI: slad.main.interface
Opt: interface
Specifies the interface on which traffic should be monitored.
Web: Destination Host IP Address
UCI:
slad.main_destination_host_ip_address
Opt: destination_host_ip_address
Specifies the destination IP address for the keepalive packets
that are originated on the LAN.
Web: Destination UDP port
UCI: slad.main.
destination_udp_ip_address
Opt: destination_udp_ip_address
Specifies the destination UDP port for the keepalive packets that
are originated on the LAN.
Web: Bin Restart Period (ms)
UCI: slad.main.bin_restart_period_msec
Opt: bin_restart_period_msec
Specifies how long one bin is collecting information.
Web: Max Bin Count
UCI: slad.main.max_bin_count
Opt: max_bin_count
Specifies how many bins are in the queue. After all empty bins
are used new information is put in the oldest bin.
Table 122: Information table for SLA settings
When you have made all your configuration changes, click Save & Apply.

virtual access GW1000M Series Specifications

General

Brand	virtual access
Model	GW1000M Series
Category	Network Router
Language	English