virtual access GW1000M Series - Page 48

8: System settings
_______________________________________________________________________________________________________
_____________________________________________________________________________________________________
© Virtual Access 2017
GW1000 Series User Manual
Issue: 1.9 Page 48 of 350
Web Field/UCI/Package Option
Description
Web: Local Time
Sets the local time and syncs with browser. You can manually
configure on CLI, using:
date –s YYYY.MM.DD-hh:mm:ss
Web: hostname
UCI: system.main.hostname
Opt: hostname
Specifies the hostname for this system.
Web: Timezone
UCI: system.main.timezone
Opt: timezone
Specifies the time zone that the date and time should be
rendered in by default.
Web: n/a
UCI: system.main.timezone
Opt: time_save_interval_min
Defines the interval in minutes to store the local time for use on
next reboot.
10m
Table 14: Information table for general settings section
8.2.2 Logging
Figure 22: The logging section in system properties
Web Field/UCI/Package Option
Description
Web: System log buffer size
UCI: system.main.log_size
Opt: log_size
Log buffer size in KB.
Range
16
16 KB
Web: External system log server
UCI: system.main.log_ip
Opt: log_ip
External syslog server IP address.
Range
0.0.0.0
Web: External system log server port
UCI: system.main.log_port
Opt: log_port
External syslog server port number.
Range
514