9: Upgrading router firmware
_______________________________________________________________________________________________________
_____________________________________________________________________________________________________
© Virtual Access 2017
GW1000 Series User Manual
Issue: 1.9 Page 59 of 350
9.1.6 Possible file corruption
Figure 36: The firmware update failure page
In the unfortunate event that the firmware upgrade fails, the ‘Failed verification. File is
most likely corrupt’ or similar message will appear in the Verify file integrity row. No
changes will be made to the system and the general message File verification failed
appears.
9.1.7 Verify the firmware has been upgraded successfully
To check the firmware version, in the top menu, browse to System -> Flash
Operations, or after router reboots, in the top menu, click Status. The Firmware
Version shows in the system list and also in the right top corner of the menu bar.
Figure 37: The system status list showing current firmware version
To Next Page
Loading...