Chapter 2, Safety: Vitals Diagnostics
E.H. Wachs Part No. 79-MAN-04, Rev. I 5
Protective Equipment Requirements
For additional information on eye and face protection, refer
to Federal OSHA regulations, 29 Code of Federal Regula-
tions, Section 1910.133., Eye and Face Protection and
American National Standards Institute, ANSI Z87.1, Occu-
pational and Educational Eye and Face Protection. Z87.1 is
available from the American National Standards Institute,
Inc., 1430 Broadway, New York, NY 10018.
Hearing protectors are required in high noise areas, 85 dBA
or greater. The operation of other tools and equipment in the
area, reflective surfaces, process noises, and resonant struc-
tures can increase the noise level in the area. For additional
information on hearing protection, refer to Federal OSHA
regulations, 29 Code of Federal Regulations, Section
1910.95, Occupational Noise Exposure and ANSI S12.6
Hearing Protectors.
VITALS DIAGNOSTICS
The Diagnostics module of Vitals Mobile lets you test elec-
tronic and mechanical functions of the valve operator.
Vitals Diagnostics operates the valve operator; use the
same safety precautions and procedures that you use
when performing valve operations.
WARNING
Always wear impact resistant eye pro-
tection while operating or working near
this equipment.
CAUTION
Personal hearing protection is recom-
mended when operating or working near
this tool.
To Next Page
Loading...