Vitals Reference Manual
58 Part No. 79-MAN-04, Rev. I E.H. Wachs
Figure 5-32.
5.
After the valve operation, tap the Back button to enter
valve data. Tap the Save icon to save the information.
Transducer Errors
If you get a
Transducer Error message while operating the
TM-7 or ERV-750, the transducer readings from the valve
operator are out of normal range. This indicates a problem
with either the transducers or cables. Caution: Vitals uses
transducer readings to calculate operating torque. Oper-
ating with incorrect readings can cause the machine to
break a valve.
Contact E.H. Wachs for service if your valve operator is
generating
Transducer Error messages.
To Next Page
Loading...