Chapter 5, Using Vitals Mobile-TC (TC-100 Controller): Valve Operation
E.H. Wachs Part No. 79-MAN-04, Rev. I 59
Figure 5-33. Example Transducer Error screen. If you
tap
Yes, the valve operation will continue. If you tap
No, the valve operation will stop.
Figure 5-34. If you selected
Yes to continue (left), the
valve operation will continue. If you selected
No, the
valve operation is stopped. The message
TRANSDUCER
ERROR
is noted on the screen.
Using the valve operator with transducer errors (by clicking
Yes) is not recommended. If necessary, you can still operate
it, but torque control will not be reliable. Use caution to
avoid damaging the valve.
To Next Page
Loading...