Vitals Reference Manual
68 Part No. 79-MAN-04, Rev. I E.H. Wachs
5.
To exit the counter test, tap the Back button.
Hydraulics Test
When you start the Hydrau-
lics Test, an error message
appears if there is a trans-
ducer error. If you see this
error message, follow the
instructions in “Transducer
Zero Torque Error” at the end
of this section before per-
forming the Hydraulics Test.
1.
Tap to select the FLOW (MIN or MAX), PRESSURE (MIN
or
MAX), and DIRECTION (LH or RH).
NOTE
To Next Page
Loading...