Chapter 4, Starting Up with Vitals: Vitals Mobile-TC
E.H. Wachs Part No. 79-MAN-04, Rev. I 21
VITALS MOBILE-TC
Vitals Mobile-TC comes pre-installed on the TC-100 con-
troller. As newer versions of Vitals Mobile-TC become
available, they can be installed through the Settings screen
in the application.
VITALS MOBILE-HC
Use this procedure for software installation if you have the
HC-100 handheld controller.
Vitals Mobile-HC comes pre-installed on the HC-100 con-
troller. As newer versions of Vitals Mobile-HC become
available, they can be installed using the following proce-
dure. (When there is a newer version of Vitals Mobile-HC,
you will be prompted to install it on the HC-100 during a
Data Transfer.) It is recommended to have the same versions
of Vitals Mobile-HC and Vitals Desktop software.
You must have Vitals Desktop installed on your PC to
perform the installation.
1.
Connect the HC-100 to the PC using the supplied USB
cable.
2.
If the controller is off, turn it on by pressing the Power
button.
If Windows Mobile Device
Center doesn’t open, see
“Problems with Windows
Mobile Device Center” in
Chapter 7, Troubleshooting.
3.
Windows Mobile Device Center should open on the
PC.
NOTE
To Next Page
Loading...