Chapter 6, Using Vitals Mobile-HC (HC-100 Controller): Vitals Mobile Controller Operation
E.H. Wachs Part No. 79-MAN-04, Rev. I 113
• Search Radius (ft) is the currently set search radius.
(You can change this on the Vitals Mobile Settings
screen.)
•
Current Lat. is the latitude of the controller
•
Current Lon. is the longitude of the controller.
• Tap the Refresh button to refresh the valve list and
location data. (Even if you don’t move, the data may
change because of variance in the GPS signal.)
3.
Tap a valve ID in the list to display its location infor-
mation.
To Next Page
Loading...