WEG CFW700 - Default Chapter; Summary of Revisions

Summary of Revisions
The table below describes the revisions made to this manual.
Version Review Description
- R01 First edition
- R02 Cover update
- R03 General revision
- R04
Inc lus ion of new fr ame si zes mod els D and E
Update from IP54 to IP55 in frame sizes B and C
ATTENTION!
Parameters P0296 (Rated Line Voltage), P0400 (Rated Motor Voltage) and
P0403 (Rated Motor Frequency), were readjusted at the:
 200...240 V / 220 / 230 V (S2, B2 and T2) models: P0296 = 0 (200 / 240 V),
P0400 = 220 V and P0403 = 60 Hz.
 380...480 V (T4) models: P0296 = 3 (440 / 460 V), P0400 = 440 V and
P0403 = 60 Hz.
 500...600 V (T5) models: P0296 = 6 (550 / 575 V), P0400 = 575 V and P0403
= 60 Hz.
For different values of line rated voltage and/or motor voltage and frequency,
set these parameters through the STARTUP menu, as presented in the user's
manual section 5.2 START-UP on page 48.