WEG SSW-06 User Manual

CHAPTER 8 - DIAGNOSTICS AND TROUBLESHOOTING
171
When it is necessary to clean the SSW-06 Soft-Starter, do so according
to the following instructions:
a) Cooling system:
Remove AC power from the Soft-Starter SSW-06 and wait 3
minutes;
Remove all dust from the ventilation openings by using a plastic
brush or a soft cloth;
Remove dust accumulated on theheat sink nsand fromthe
blower blades with compressed air.
b) Electronic boards:
Remove AC power from the Soft-Starter SSW-06 and wait 3
minutes;
Remove all dust from the printed circuit boards by using an an-
ti-static soft brush or remove it with an ionized compressed air
gun (example Charges Burtes Ion Gun (non nuclear) - reference
A6030-6DESCO);
If necessary, remove the PCBs from the Soft-Starter SSW-06;
Always use a ground strap.
8.4.1 Cleaning Instructions

WEG SSW-06 Specifications

General

Brand	WEG
Model	SSW-06
Category	Controller
Language	English