WEG SSW-06 User Manual

CHAPTER 1 - SAFETY NOTICES
23
NOTE!
InthisManual,qualiedpersonnelaredenedaspeoplethataretrainedto:
1. Install, ground, power-up and operate the SSW-06 according to this
Manual and the local required safety procedures;
2. Use of safety equipment according to the local regulations;
3. Administer First Aid Treatment.
DANGER!
Always disconnect the main power supply before touching any electrical
component associated with the SSW-06 Soft-Starter.
High voltages and spinning parts (fans) may be present even after switching
o󰀨thepowersupply.Waitatleast3minutesforthecompletedischargeof
the capacitors and until the fans stopped.
Always connect the equipment frame to the protection earth (PE) in the
appropriate place for this.
ATTENTION!
All electronic boards have components that are sensitive to electrostatic
discharges. Never touch any of the electrical components or connectors
without following proper grounding procedures. If necessary to do so, touch
the properly grounded metallic frame or use a suitable ground strap.
NOTE!
Soft-Starter SSW-06 can interfere with other electronic equipment. In order
to reduce this interference, adopt the measures recommended in Section
3 “Installation”.
NOTE!
Read this entire manual carefully and completely before installing or operating
the Soft-Starter SSW-06.
NOTE!
This product is only available for elevator duty on US market.
ATTENTION!
When in operation, electric energy systems – such as transformers,
converters,motorsandcables–generateelectromagneticelds(EMF),
posing a risk to people with pacemakers or implants who stay in close
proximity to them. Therefore, those people must stay at least 2 meters
away from such equipment.
Do not apply a high voltage (High Pot) test on the Soft-Starter SSW-06!
If this test is necessary, contact the manufacturer.
DANGER!
Onlyqualiedpersonnelshouldplanorimplementtheinstallation,start-up,
operation and maintenance of this equipment. Personnel must review this
entire Manual before attempting to install, operate or troubleshoot the SSW-06.
These personnel must follow all safety instructions included in this Manual
and/ordenedbylocalregulations.
Failuretocomplywiththeseinstructionsmayresultinpersonalinjuryand/
or equipment damage.
1.3 PRELIMINARYRECOM-
MENDATIONS

WEG SSW-06 Specifications

General

Brand	WEG
Model	SSW-06
Category	Controller
Language	English