WEG SSW-06 User Manual

22
SAFETY NOTICES
This Manual contains all necessary information for the correct ins-
tallation and operation of the SSW-06 Soft-Starter.
TheSSW-06InstructionManualhasbeenwrittenforqualiedper-
sonnelwithsuitabletrainingortechnicalqualicationstooperatethis
type of equipment.
The following Safety Notices will be used in this Manual:
DANGER!
If the recommended Safety Instructions are not strictly observed, se-
riousorfatalinjuriesofpersonneland/orequipmentdamagecanoccur.
ATTENTION!
Failure to observe the recommended Safety Procedures can lead to
material damage.
NOTE!
The content of this Manual supplies important information for the
correct understanding of operation and proper performance of the
equipment.
1.1 SAFETY NOTICES
 INTHEMANUAL
1.2 SAFETY NOTICES ON
THE PRODUCT
The following symbols may be attached to the product, serving as
Safety Notices:
High Voltages.
Components are sensitive to electrostatic discharge. Do not
touch them without following proper grounding procedures.
Mandatory connection to ground protection (PE).
Shield connection to ground.
CHAPTER 1

WEG SSW-06 Specifications

General

Brand	WEG
Model	SSW-06
Category	Controller
Language	English