WEG SSW-06 User Manual

CHAPTER 6 - DETAILED PARAMETER DESCRIPTION
142
Range
[Factory Setting]
Parameter Unit Description / Notes
 It allows enabling the execution of the user applicative software.
RefertotheWLPmanualformoreinformation.
P950
(2)
EnableSoftPLC
6.9SOFTPLCPARAMETERS-P950toP999
0 to 1
[ 0=No ]
1
 They are disposed sequentially from P952 to P969.
TheseparametersareavailablefortheSoftPLCusertoapplythem
as reading or writing variables of the applicative software.
RefertotheSSW-06SoftPLCmanualformoredetails.
P952 a P969
SoftPLCUserPara-
meters
Table 6.56 - Enables the SoftPLC execution
0 to 65535
[ 0 ]
1
 Its function is to enable the digital inputs and outputs expansion
board of the kit K-IOE (see chapter 9). This card only can be used
throughoftheSoftPLC.
P951
Digital Inputs and Ou-
tputs Expansion Card
Enable
0 to 1
[ 0=No ]
Table 6.57 - Digital inputs and outputs expansion board enable
NOTE!
If it uses this digital inputs and outputs expansion board it cannot
beusedtheeldbuscommunicationcards(kitsKFB).
P950 Description
0 No
1 Yes
P951 Description
0 No
1 Yes

WEG SSW-06 Specifications

General

Brand	WEG
Model	SSW-06
Category	Controller
Language	English