WEG SSW-06 User Manual

24
GENERALINFORMATION
Thischapterdenesthecontentsandpurposeofthismanualand
describes the main characteristics of the SSW-06 Soft-Starter. Iden-
ticationoftheSSW-06,receivingandstoragerequirementsarealso
provided.
This manual is divided into 10 chapters, providing information to the
user on how to receive, install, start-up and operate the Soft-Starter
SSW-06.
Chapter 1 - Safety Notices;
Chapter 2 - General information, receiving and storing of the SSW-
06;
Chapter 3 - Information about installation and connection of the
Soft-Starter SSW-06 power and control circuit, how to
install options and recommended setups;
Chapter 4 - Using the Keypad (Human Machine Interface - HMI);
Chapter 5 - Information about running and steps to be followed;
Chapter 6 - Detailed description of all Soft-Starter SSW-06 pro-
gramming parameters;
Chapter 7- Information and suggestions on how to program the
types of control and protections;
Chapter 8 - Information about diagnostics and troubleshooting,
cleaning instructions and preventive maintenance;
Chapter 9 - SSW-06 Soft-Starter optional devices;
Chapter 10 - Tables and technical information about the power lines
of the Soft-Starter SSW-06.
This manual provides information for the correct use of the Soft-Star-
ter SSW-06. Due to the various functions of the Soft-Starter SSW-06
manydi󰀨erentmodesofoperationarepossible.
As the Soft-Starter SSW-06 can be applied in several ways, it is
impossible to describe here all application possibilities, neither can
WEG assume any responsibility when the Soft-Starter SSW-06 is not
used according to this manual.
No part of this manual may be reproduced in any form, without written
permission from WEG.
It is important to note the software version installed in the Soft-Starter
SSW-06,sinceitdenesthefunctionsandtheprogrammingpara-
meters of the Soft-Starter. This manual refers to the software version
indicated on the inside cover. For example, the version 1.0X applies
to versions 1.00 to 1.09, where “X” is a variable that will change due
to minor software revisions.
The software version can be read in the parameter P023.
The Soft-Starter SSW-06 is a high performance Drive that permits
the start control of three-phase AC induction motors. The Soft-Starter
SSW-06 prevents mechanical shocks on the load and current peaks
in the supply line.
Among the main characteristics of this product is its line and connection
fault detection capacity thus enabling the customer to choose the best
way of protecting his motor, such as:
2.1 ABOUTTHISMANUAL
2.2 SOFTWARE VERSION
2.3 ABOUT THE
SOFT- STARTER
SSW-06
CHAPTER 2

WEG SSW-06 Specifications

General

Brand	WEG
Model	SSW-06
Category	Controller
Language	English