Weinig Profimat 23 E - Workpiece and Feed Specifications

Tech. Dok. / L23 880 02 / 05.99.01 © MICHAEL WEINIG AG
Data, transport, start-up
8-4 Profimat 23 E
Workpiece
Width min./max. for tool dia. 125 mm (4.92") [mm] 20/230 *20/260
0.787"/9.055" *0.787"/10.250"
Height min./max. for tool dia. 125 mm (4.92") [mm] 8/120 *8/160
0.315"/4.725" *0.315"/6.299"
* Optional. Special tools may be used in consultation with WEINIG.
Tool clamping lengths
Straightening spindle, [mm] 247 (9.725")
Edge-jointing spindle, left-hand spindle [mm] 130 (5.118")
Top spindle, universal spindle, [mm] 240 (9.448")
bottom spindle
Motor rating
Straightening spindle, top spindle, [kW] 4 – 11 (5.6 Hp – 15 Hp)
bottom spindle, universal spindle
One motor for left-hand and edge-jointing spindle [kW] 5,5 – 11 (7.5 Hp – 15 Hp)
Spindle diameter
All spindles standard [mm] 40
optional [inch] 1
1
/
2
Tool cutting circle diameter
Straightening spindle min./max. [mm] 125/145 (4.921"/5.748")
Rebate cutter [mm] 145 (5.748")
Edge-jointing spindle, min./max. [mm] 100/200* (3.937"/7.874")*
left-hand spindle
Spindle
Top spindle, min./max. [mm] 100/200 (3.937"/7.874")
Bottom spindle, Universal spindle
* Max. 15 mm below table possible for tool dia. 200 mm (7.874")
Max. 40 mm below table possible for tool dia. < 180 mm (7.087")
Spindle speed
All spindles [rpm] 6.000
Universal spindle [rpm] 6.000
Feed
Mechanical [m/min.] 5 – 24 (16 – 78 ft/min.)
Motor output standard [kW] 2,2 (3 Hp)
optional [kW] 3 (4 Hp)
Height adjustment standard [kW] 0,25 (0.30 Hp)
optional [kW] 0,55 (0.75 Hp)