System Setup WDR Software User Manual
2-20 24-10437-3 Rev. A
This document contains confidential and proprietary information of Weldex Corporation.9/10/08
Add Group Field Definitions
NOTE
The Copy function is accessible from the Live Mode taskbar as well as
from Main Menu. Privilege to use this function from the taskbar is
independent of the privilege to use it from the menu. To prevent a user
from copying recording files to an outside media, both Copy check boxes
must be un-selected.
Group – Displays the name of the user group. Use the virtual keyboard to edit this
field.
Search –
If selected, members of this user group are allowed to use the Search
button on the Live Mode taskbar.
PTZ – If selected, members of this user
group are allowed to use the PTZ button on
the Live Mode taskbar.
Copy –
If selected, members of this user group are allowed to use the Copy button
on the Live Mode taskbar.
System – If selected, members of th
is user group can use the System menu.
NOTE
It is not recommended that only the administrator is given rights to use the
System menu.
Record – If selected, members of this user group can use the Record menu.
Device – If selected, members of th
is user group can use the Device menu.
Network
– If selected, members of this user group can use the Network menu.
Copy – If selected, members of this user group can use
the Copy menu.
Camera –
Select the cameras available to the user group members. When not
selected, viewing images from that camera will be disabled. However, the user will
be able to access cameras in the Playback Mode if this user has Search privileges.
OK
– Click to confirm the changes.
Cancel – Click to cancel t
he changes.
Close – Click to close the window.
Adding/Editing System Users
To add/edit system user:
1. From the Main menu select System>User Management.
To Next Page
Loading...