WDR Software User Manual System Setup
24-10437-3 Rev. A 2-43
This document contains confidential and proprietary information of Weldex Corporation. 9/10/08
Recording Options
Off – Select to disable recording for the specified hour(s)
C:Continuous –
Select to record continuously.
M:Motion Detection – Select to set motion detection recording.
NOTE
Consider camera placement when using motion detection. This feature
works best when the motion (e.g. a person walking) occurs across the
camera's field of view and is less sensitive when the motion is directly
toward or away from the camera's lens.
S:Sensor – Select to set sensor recording.
A:Continuous & Sensor – Select for continuous and
sensor recording.
B:Motion & Sensor – Select for motion and sensor recording.
Other
Holiday Setup – Click to set up the holiday schedule. See page 2-41 for details.
Save – Click
to save the changes.
Cancel – Click to cancel t
he changes.
Close – Click to close the window.
Tips on Using the Recording Matrix
The recording matrix consists of multiple cells. Each cell corresponds to one hour of
a specific day of the week (or a pre-defined holiday).
When you configure recording schedule, you decide
what type of recording is
supposed to occur each specific hour. While each hour can be configured separately,
there are also ways to configure several hours at once. Various ways of using the
matrix are described below.
T
o set recording type for a specific hour:
1. Select the type of recording, for example, M:
Motion Detect.
2. Click on the cell in the matrix, for example, column 3, row TUE,
co
rresponding to Tuesday 3 AM.
To Next Page
Loading...
