WDR Software User Manual System Setup
24-10437-3 Rev. A 2-53
This document contains confidential and proprietary information of Weldex Corporation. 9/10/08
9. Fill out the remaining information. Refer to “Manual Copy Field Definitions”
for details
10. Click the START button.
11. When the Progress bar indicates completion of the copy process, click Close.
Manual Copy Field Definitions
Device – Select the physical device to which the data will be copied.
Scan – Click to scan for devices.
File Format – Select the type of format used. Currently only a proprietary WSF file
format is supported.
From – Specify “from” date and time for the recording period to be copied.
To – Specify “to” date and time for the recording period to be copied.
Camera – Select one or more camera(s). The All button allows you to select all
cameras at once.
Estimated File Size – Indicates approximate file size.
Add Viewer – Selecting this option will add a viewer software, called Single Player,
to the copied files. Using the viewer the video can be played back on a PC without
the WDR software loaded on it.
Progress – Progress indicator.
Start – Click to begin copying.
Cancel – Cancels the copying process.
Close – Click to close the screen.
To Next Page
Loading...
