Safety
Safety Instructions
Safety 60HDdoc102619 1-7
1
DANGER! Always keep hands away from moving bandsaw blade. Failure to
do so will result in serious injury.
DANGER! Always be aware of and take proper protective measures against
rotating shafts, pulleys, fans, etc. Always stay a safe distance from rotating
members and make sure that loose clothing or long hair does not engage
rotating members resulting in possible injury.
WARNING! Do not for any reason adjust the engine drive belts or belt support
bracket with the engine running. Doing so may result in serious injury.
CAUTIONS FOR GAS OR DIESEL ENGINE OPERATION
DANGER! Operate your engine/machine only in well ventilated areas.
The exhaust gases of your engine can cause nausea, delirium and
potentially death unless adequate ventilation is present.
DANGER! Never operate an engine with a fuel or oil leak. The leaking
fuel or oil could potentially come in contact with hot surfaces and ignite
into flames.
WARNING! Do not operate engine without proper and operational
spark arrester/muffler. Sparks emitted from the engine exhaust could
ignite surrounding materials, causing serious injury or death.
USE PROPER PROCEDURE WHEN CONDUCTING ELECTRICAL SAFETY CHECKS
AND MAINTENANCE
DANGER! Make sure all electrical installation, service and/or maintenance
work is performed by a qualified electrician and is in accordance with
applicable electrical codes.
DANGER! Hazardous voltage inside the electric boxes and at the motor can
cause shock, burns, or death. Disconnect and lock out power supply before
servicing! Keep all electrical component covers closed and securely fastened
during mill operation.
To Next Page
Loading...
Need help?
General
