Specifications
Engine/Motor Specifications
Specifications 60doc102619 8-5
8
8.3 Engine/Motor Specifications
See Table 8-3. The power options available for the LT70 Series sawmills are listed below.
See Table 8-4. Power Feed and Up/Down Systems for the LT70 Series sawmills are listed below
.
See Table 8-5. The The noise levels of the Wood-Mizer sawmills are listed below.
12
Engine/Motor Type
1
1
Use diesel fuel for D42.
Manufacturer Model No. Power Other Specifications
42HP Diesel Kubota, Japan V1505-TE 42 HP
4 cylinders, 1498 cm
3
25HP Electric Motor
2
2
The electric motors supplied on Wood-Mizer sawmills carry a rating assigned by the motor manufacturer
for the continuous duty operation of the motor, potentially, 24 hours per day, day after day. This rating is
useful in sizing motors for use in applications like blowers for heating and ventilation that are never cycled
off except for system maintenance.
Siemens,
Germany
1LA7166-2AA60Z 18.5 kW 33.8 A, 2930 r.p.m.
TABLE 8-3
Engine/Motor Type Manufacturer Voltage Power WM Part #
Power Feed Motor Leeson, USA 12V 1800 r.p.m.-600W 023688
Up/Down Motor Leeson, USA 12V 1800 r.p.m.-600W 015174
Blade Guide Arm Motor Motor Products
Owosso, USA
12V 60 r.p.m.-17W P09698-1
Hydraulic Pump Motor Motor Products
Owosso, USA
12V 2400 r.p.m.-1320W P09955
TABLE 8-4
Sawmill Noise Level L
EX8
Sawmill Equipped With Electric Motor 83 dB (A)
Sawmill Equipped With Gas Engine 87.4 dB (A)
TABLE 8-5
1. The noise level measurement was taken in accordance with PN-EN ISO 3746 Standard.
The noise exposure level given above concerns an 8-hour work day.
2.The measured values refer to emission levels, not necessarily to noise levels in the workplace.
Although there is a relation between emission levels and exposure levels, it is not possible to
determine with certainty if preventives are needed or are not needed. The factors affecting a current
level of noise exposure during work are inter alia room characteristics and characteristics of other
noise sources, e.g. number of machines and machining operations nearby. Also, the permissible
exposure level value may vary depending on country. This information enables the machine’s user to
better identify hazards and a risk.
To Next Page
Loading...
Need help?
General
