Sawmill Setup
Starting The Engine (or Motor)
Sawmill Setup 60HDdoc102619 3-17
3
DANGER! Make sure all guards and covers are in place and secured
before operating or towing the sawmill. Failure to do so may result in
serious injury. Be sure the blade housing and pulley covers are closed
(i.e. the safety switches located on them are engaged).
IMPORTANT! After aligning the blade on the wheels, always
double-check the blade guide spacing and location. (See Section 7
for
more information.)
3.8 Starting The Engine (or Motor)
See the appropriate manual supplied with your specific engine/motor configuration for starting
and operating instructions.
DANGER! Make sure all guards and covers are in place and secured
before operating or towing the sawmill. Failure to do so may result in
serious injury. Be sure the blade housing and pulley covers are closed
(i.e. the safety switches located on them are engaged).
DANGER! Always be sure that all persons are out of the path of the
blade before starting the engine or motor. Failure to do so will result in
serious injury.
WARNING! Always wear eye, ear, respiration, safety clothing, and foot
protection when operating the sawmill. Failure to do so may result in
serious injury.
WARNING! Be sure the power feed switch is in the neutral position
before turning the key switch to the #1or #2 position. This prevents
accidental carriage movement which may cause serious injury or
death.
DANGER! Check the sawmill wiring every year. Make sure all
electrical installation, service and/or maintenance work is performed by
a qualified electrician.
WARNING! Hazardous voltage inside the electric box is dangerous.
Turn the main switch to the OFF (“0”) position and lock out power
supply before opening the box door!
WARNING! The door of the electric box can be opened only when the
main switch is in the “0” position. The door is closed when the switch is
in the “1” position. Serious damage to the box may result while opening
the door when the main switch is in the “1” position.
To Next Page
Loading...
Need help?
General
