Specifications
Hydraulic Blade Tensioner ComponentsSawdust Extractor Specifications
8
8-8 60doc102619 Specifications
8.9 Hydraulic Blade Tensioner ComponentsSawdust Extractor Specifications
CAUTION! Always turn on the dust extractor before starting the
machine.
See Table 8-12. The dust extractor specifications are given below.
ID Description
1 Non-Return Valve HVR NW10MLED
2 Hose DN-12
3 Hose DN-12
4 T-Pipe DT RNW10HL
5 Connector VRNW10HL
6 Elbow W90HROKO6HJ04
7 Hose 1/4”
8 Elbow W90HROK04HJ
9 Valve ECP 20/22B2
10 Connector 4-4F642E DM XS
11 Throttle Valve VSG522.100000
12 Connector 4-4F42ED MXS
TABLE 8-11
Maximum Capacity
1200 m
3
/h
Collector Inlet Diameters
(in front of fan)
150 mm
Motor Power 1.5 kwh
Number of Sacks for Waste 1 pc
Total Capacity of Sacks
0,25 m
3
Weight 110 kg
Conveying Speed When 10 m
Long Hose Is Used
20 m/s
TABLE 8-12
To Next Page
Loading...
