Maintenance 60HDdoc102619 5-3
MAINTENANCE LOG
(Check Engine And Option Manuals For Additional Maintenance Procedures)
PROCEDURE
MANUAL
REFERENCE
TOTAL HOURS OF OPERATION
FILL IN THE DATE AND THE MACHINE HOURS AS YOU PERFORM EACH PROCEDURE.
A SHADED BOX INDICATES MAINTENANCE IS NOT NEEDED AT THIS TIME.
1050 HRS 1100 HRS 1150 HRS 1200 HRS 1250 HRS 1300 HRS 1350 HRS 1400 HRS 1450 HRS 1500 HRS
Lubricate drum switches See Section 5.5
Grease pivot points and bearings/Oil chains See Section 5.6
Lubricate blade tensioner screw See Section 5.6
Check brake strap tension See Section 5.8
Check belt tensions See Section 5.9
See Section 5.11
Check feed & up/down chain tensions See Section 5.11
See Section 5.12
Check up/down & power feed gear box fluid levels See Section 5.11
See Section 5.12
Inspect hydraulic lines & fittings See Section 5.10
Check hydraulic fluid level See Section 5.10
Replace hydraulic system filter See Section 5.10
Inspect hydraulic pump, power feed and up/down
motor brushes
See Section 5.10
See Section 5.11
See Section 5.12
To Next Page
Loading...
Need help?
General
