Woodward HighPROTEC - Page 338

Communication Protocols
Name Description Assignment via
Config Bin Inp32-
I
State of the module input: Config Bin Inp [Device Para
/Modbus
/Configb Registers
/States]
Values of the MODBUS
®
Protocol
Value Description Menu path
Mapped Meas 1 Mapped Measured Values. They can be used to
provide measured values to the Modbus Master.
[Operation
/Count and RevData
/Modbus
/General Settings]
Mapped Meas 2 Mapped Measured Values. They can be used to
provide measured values to the Modbus Master.
[Operation
/Count and RevData
/Modbus
/General Settings]
Mapped Meas 3 Mapped Measured Values. They can be used to
provide measured values to the Modbus Master.
[Operation
/Count and RevData
/Modbus
/General Settings]
Mapped Meas 4 Mapped Measured Values. They can be used to
provide measured values to the Modbus Master.
[Operation
/Count and RevData
/Modbus
/General Settings]
Mapped Meas 5 Mapped Measured Values. They can be used to
provide measured values to the Modbus Master.
[Operation
/Count and RevData
/Modbus
/General Settings]
Mapped Meas 6 Mapped Measured Values. They can be used to
provide measured values to the Modbus Master.
[Operation
/Count and RevData
/Modbus
/General Settings]
Mapped Meas 7 Mapped Measured Values. They can be used to
provide measured values to the Modbus Master.
[Operation
/Count and RevData
/Modbus
/General Settings]
338 MCDGV4 DOK-HB-MCDGV4-2E