Woodward HighPROTEC - Page 339

Communication Protocols
Value Description Menu path
Mapped Meas 8 Mapped Measured Values. They can be used to
provide measured values to the Modbus Master.
[Operation
/Count and RevData
/Modbus
/General Settings]
Mapped Meas 9 Mapped Measured Values. They can be used to
provide measured values to the Modbus Master.
[Operation
/Count and RevData
/Modbus
/General Settings]
Mapped Meas 10 Mapped Measured Values. They can be used to
provide measured values to the Modbus Master.
[Operation
/Count and RevData
/Modbus
/General Settings]
Mapped Meas 11 Mapped Measured Values. They can be used to
provide measured values to the Modbus Master.
[Operation
/Count and RevData
/Modbus
/General Settings]
Mapped Meas 12 Mapped Measured Values. They can be used to
provide measured values to the Modbus Master.
[Operation
/Count and RevData
/Modbus
/General Settings]
Mapped Meas 13 Mapped Measured Values. They can be used to
provide measured values to the Modbus Master.
[Operation
/Count and RevData
/Modbus
/General Settings]
Mapped Meas 14 Mapped Measured Values. They can be used to
provide measured values to the Modbus Master.
[Operation
/Count and RevData
/Modbus
/General Settings]
Mapped Meas 15 Mapped Measured Values. They can be used to
provide measured values to the Modbus Master.
[Operation
/Count and RevData
/Modbus
/General Settings]
Mapped Meas 16 Mapped Measured Values. They can be used to
provide measured values to the Modbus Master.
[Operation
/Count and RevData
/Modbus
/General Settings]
339 MCDGV4 DOK-HB-MCDGV4-2E