Woodward HighPROTEC - Page 571

Switchgear/Breaker – Manager
Parameter Description Setting range Default Menu path
Off Cmd34 Off Command to the Circuit Breaker if the
state of the assigned signal becomes true.
1..n, Trip Cmds -.- [Control
/SG
/SG[1]
/Trip Manager]
Off Cmd35 Off Command to the Circuit Breaker if the
state of the assigned signal becomes true.
1..n, Trip Cmds -.- [Control
/SG
/SG[1]
/Trip Manager]
Off Cmd36 Off Command to the Circuit Breaker if the
state of the assigned signal becomes true.
1..n, Trip Cmds -.- [Control
/SG
/SG[1]
/Trip Manager]
Off Cmd37 Off Command to the Circuit Breaker if the
state of the assigned signal becomes true.
1..n, Trip Cmds -.- [Control
/SG
/SG[1]
/Trip Manager]
Off Cmd38 Off Command to the Circuit Breaker if the
state of the assigned signal becomes true.
1..n, Trip Cmds -.- [Control
/SG
/SG[1]
/Trip Manager]
Off Cmd39 Off Command to the Circuit Breaker if the
state of the assigned signal becomes true.
1..n, Trip Cmds -.- [Control
/SG
/SG[1]
/Trip Manager]
Off Cmd40 Off Command to the Circuit Breaker if the
state of the assigned signal becomes true.
1..n, Trip Cmds -.- [Control
/SG
/SG[1]
/Trip Manager]
Off Cmd41 Off Command to the Circuit Breaker if the
state of the assigned signal becomes true.
1..n, Trip Cmds -.- [Control
/SG
/SG[1]
/Trip Manager]
Off Cmd42 Off Command to the Circuit Breaker if the
state of the assigned signal becomes true.
1..n, Trip Cmds -.- [Control
/SG
/SG[1]
/Trip Manager]
571 MCDGV4 DOK-HB-MCDGV4-2E