Woodward HighPROTEC - Page 570

Switchgear/Breaker – Manager
Parameter Description Setting range Default Menu path
Off Cmd25 Off Command to the Circuit Breaker if the
state of the assigned signal becomes true.
1..n, Trip Cmds -.- [Control
/SG
/SG[1]
/Trip Manager]
Off Cmd26 Off Command to the Circuit Breaker if the
state of the assigned signal becomes true.
1..n, Trip Cmds -.- [Control
/SG
/SG[1]
/Trip Manager]
Off Cmd27 Off Command to the Circuit Breaker if the
state of the assigned signal becomes true.
1..n, Trip Cmds -.- [Control
/SG
/SG[1]
/Trip Manager]
Off Cmd28 Off Command to the Circuit Breaker if the
state of the assigned signal becomes true.
1..n, Trip Cmds -.- [Control
/SG
/SG[1]
/Trip Manager]
Off Cmd29 Off Command to the Circuit Breaker if the
state of the assigned signal becomes true.
1..n, Trip Cmds -.- [Control
/SG
/SG[1]
/Trip Manager]
Off Cmd30 Off Command to the Circuit Breaker if the
state of the assigned signal becomes true.
1..n, Trip Cmds -.- [Control
/SG
/SG[1]
/Trip Manager]
Off Cmd31 Off Command to the Circuit Breaker if the
state of the assigned signal becomes true.
1..n, Trip Cmds -.- [Control
/SG
/SG[1]
/Trip Manager]
Off Cmd32 Off Command to the Circuit Breaker if the
state of the assigned signal becomes true.
1..n, Trip Cmds -.- [Control
/SG
/SG[1]
/Trip Manager]
Off Cmd33 Off Command to the Circuit Breaker if the
state of the assigned signal becomes true.
1..n, Trip Cmds -.- [Control
/SG
/SG[1]
/Trip Manager]
570 MCDGV4 DOK-HB-MCDGV4-2E