Woodward HighPROTEC - Page 569

Switchgear/Breaker – Manager
Parameter Description Setting range Default Menu path
Off Cmd16 Off Command to the Circuit Breaker if the
state of the assigned signal becomes true.
1..n, Trip Cmds -.- [Control
/SG
/SG[1]
/Trip Manager]
Off Cmd17 Off Command to the Circuit Breaker if the
state of the assigned signal becomes true.
1..n, Trip Cmds -.- [Control
/SG
/SG[1]
/Trip Manager]
Off Cmd18 Off Command to the Circuit Breaker if the
state of the assigned signal becomes true.
1..n, Trip Cmds -.- [Control
/SG
/SG[1]
/Trip Manager]
Off Cmd19 Off Command to the Circuit Breaker if the
state of the assigned signal becomes true.
1..n, Trip Cmds -.- [Control
/SG
/SG[1]
/Trip Manager]
Off Cmd20 Off Command to the Circuit Breaker if the
state of the assigned signal becomes true.
1..n, Trip Cmds -.- [Control
/SG
/SG[1]
/Trip Manager]
Off Cmd21 Off Command to the Circuit Breaker if the
state of the assigned signal becomes true.
1..n, Trip Cmds -.- [Control
/SG
/SG[1]
/Trip Manager]
Off Cmd22 Off Command to the Circuit Breaker if the
state of the assigned signal becomes true.
1..n, Trip Cmds -.- [Control
/SG
/SG[1]
/Trip Manager]
Off Cmd23 Off Command to the Circuit Breaker if the
state of the assigned signal becomes true.
1..n, Trip Cmds -.- [Control
/SG
/SG[1]
/Trip Manager]
Off Cmd24 Off Command to the Circuit Breaker if the
state of the assigned signal becomes true.
1..n, Trip Cmds -.- [Control
/SG
/SG[1]
/Trip Manager]
569 MCDGV4 DOK-HB-MCDGV4-2E