Protective Elements
Signal Description
ExBlo Signal: External Blocking
Fuse Fail VT Blo Signal: Blocked by Fuse Failure (VT)
Alarm Signal: Alarm Reactive Power Undervoltage Protection
Decoupling Distr. Generator Signal: Decoupling of the (local) Energy Generator/Resource
Decoupling PCC Signal: Decoupling at the Point of Common Coupling
Power Angle Signal: Admissible power angle exceeded
Reactive Power Thres Signal: Admissible Reactive Power Threshold exceeded
VLL too low Signal: Line-to-Line voltage too low
968 MCDGV4 DOK-HB-MCDGV4-2E
To Next Page
