Xerox 4110 - Load Paper in Optional (HCF) Trays 6 and 7

Xerox 4590/4110 Copier/Printer User Guide
7-7
7. Paper and Other Media
3. Load paper with the side to be copied or printed on facing
up, and insert the paper lightly along the paper guide on the
front side of the machine until it comes to a stop.
KEY POINT: Do not load mixed size paper into the tray.
Do not load paper exceeding the maximum fill line. Doing
so might cause paper jams or machine trouble.
4. When loading a non-standard paper size from Tray 5
(Bypass), move the paper guides to accommodate the
paper.
5. Select copying or printing.
Load paper in optional (HCF) Trays 6 and 7
1. Pull out the tray towards you until it stops.
WARNING: When pulling out the paper tray, do it slowly. If pulled
out with too much force, the tray can hit and injure your knees.
2. Load and align the edge of the paper against the right edge
of the tray with the side to be copied or printed on facing up.
NOTE: Do not load paper exceeding the maximum fill line. Doing
so might cause paper jams or machine trouble.