Xerox 4590/4110 Copier/Printer User Guide
2-52
2. Copy
Copy Booklet
If you wish to make booklets from an original that is already a
booklet, select Copy Booklet. The original will be scanned as is
by specifying Bi-fold/Stapling without having to specify Booklet
Imposition.
Covers
You can attach a cover to a booklet. Selections for covers are as
follows:
•No Covers
No cover is added.
• Blank Covers
A blank sheet of paper is attached as the cover.
• Printed Covers - 2 Sided
The document is copied to the cover from the first page.
• Printed Covers - Print Outside
The document is copied to only the outside of the cover.
Last Original as Back Cover
Pastes the final image to the last page of the booklet as Back
Cover. Check when specifying the last page as the back cover.
When using Subsets to divide a booklet, final image is pasted to
the last page of the last division set.
NOTE: A blank page may be inserted just before the last page to
ensure correct pagination.
Gutter
Displays the Booklet Creation - Gutter screen.
Finishing
Displays the Booklet Creation - Finishing screen.
Paper Tray Settings
Displays the Booklet Creation - Paper Tray Settings screen.
NOTE: This only displays when Covers is selected.
Select the paper tray from Cover Tray and Text Tray. Select trays
with paper of the same size and orientation for the text and the
cover.
When Bypass is selected, the Tray 5 (Bypass) screen appears.
For more information, refer to “Tray 5 (Bypass) Screen” on
page 2-21.
To Next Page
Loading...
Need help?
General