Xerox 4110 - Replacing the Staple Waste Container

Xerox 4590/4110 Copier/Printer User Guide
10-14
10. Maintenance
Replacing the Staple Waste Container (D2 Finisher only)
If the machine indicates that the Staple Waste Container is full,
follow this procedure to replace the container.
1. Make sure that the machine has stopped, and then open the
right cover on the finisher.
2. Locate the Staple Waste Container (R5) in the finisher
3. Grip the container and move the lever right to the Unlock
position.
4. Remove the container from the finisher.
5. Remove the new container from the packaging. Dispose the
full container in the packaging that came with the new
container.