Xerox 4590/4110 Copier/Printer User Guide
11-65
11. Problem Solving
Paper jams at lever 3b and 3d
1. Make sure that the machine has stopped and then open the
right cover on the light finisher.
2. Move levers 3b and 3d to the left, and remove the jammed
paper.
NOTE: If paper is torn, check for any torn pieces of paper inside
the machine.
3. Return levers 3b and 3d the original position.
4. Close the Finisher right cover.
NOTE: A message will be displayed and the machine will not
operate if the Staple Finisher's right cover is even slightly
open.
To Next Page
Loading...
Need help?
General