Xerox 4590/4110 Copier/Printer User Guide
9-10
9. Machine Status
Programming
You can check or set the values for a printer mode item number.
1. Select Programming.
2. Enter the Item Number for the feature to be set, using the
numeric keypad.
3. Select Confirm.
4. Select Change Value.
5. Enter New Value, using the numeric keypad.
6. Select Save.
7. Select Close to leave this screen.
îš„ Item Number
Enter the item number for the feature you want to set.
îš„ Current Value
When you enter an Item Number, this shows the currently set
value.
îš„ New Value
Enter the value to which you want to change the setting.
To Next Page
Loading...
Need help?
General