Xerox 4110 User Manual

Xerox 4590/4110 Copier/Printer User Guide
11-44
11. Problem Solving
091-311  Cause Charge Corotron cleaner failure.
Remedy Power-cycle the machine. If the error is not fixed by
performing the relevant remedy, contact the Customer
Support Center.
116-701  Cause 2 sided print could not be made.
Remedy Print each side separately.
116-702  Cause Printing was performed using a substitute font.
Remedy Check the print data.
116-703  Cause An error occurred during PostScript processing.
Remedy Either confirm the print data or click Spool Settings on
the Details tab in the print driver to set bi-directional
communications to off.
116-710  Cause A probable cause is that the correct document size could
not be judged as the receive data exceeded the HP-GL/2
spool size.
Remedy Increase the size assigned to HP-GL/2 auto-layout
memory.
116-713  Cause Job was divided and printed due to insufficient disk
space.
Remedy Remove unnecessary data from the hard disk to
increase free disk space.
116-714  Cause An HP-GL/2 command error occurred.
Remedy Check the print data.
116-720  Cause An error occurred during printing as there was
insufficient memory.
Remedy Stop unnecessary ports and remove unnecessary data
from the hard disk to increase free disk space.
116-740  Cause Numerical value operation error occurred as a value
exceeding the value limit of the printer was used in the
print data.
Remedy Check the print data.
116-747  Cause There are too many paper margin values for the
HP-GL/2 effective coordinate area.
Remedy Reduce the paper margin values, and instruct it to print
again.
116-748  Cause There is no plot data in the HP-GL/2 print data.
Remedy Check the print data.
116-749  Cause Job cancelled because the specified font was
unavailable.
Remedy Install the font or set up a font replacement on the print
driver side.
Error Code
Category
Cause and Remedy
CPSMO

Xerox 4110 Specifications

General

Brand	Xerox
Model	4110
Category	Printer
Language	English