6Setups
104
Print User ID
Specifies whether to print the user ID and the position to print the ID, when printing
using a printer driver to distinguish between users. The user ID is a maximum of 64
characters set by the printer driver. For more information, refer to the printer driver
online help.
Banner Sheet
Specifies whether to add sorting sheets (banner sheets). This is effective for
sorting/classifying to differentiate printed sheets from the rest. You can add banner
sheets before and/or at the end of the print job.
NOTE: Even if the Finisher is used, banner sheets will not be stapled. Banner sheets
from print jobs from a Macintosh do not display the document name. Printing banner
sheets also increments the billing meter.
Banner Sheet Tray
Specifies the tray for banner sheets.
PostScript Paper Supply
Specifies whether to use the DMS (Deferred Media Selection) feature of PostScript or
to select a paper tray.
PostScript Font Absence
Specifies whether to substitute fonts automatically and continue the print job when a
required font is not found. The substitute font is Courier.
NOTE: This feature is available only when PostScript is loaded.
PostScript Font Substitution
Specifies whether to use ATCx during font substitution.
NOTE: This feature is available only when PostScript is loaded.
XPS Print Ticket Processing
Specifies how the machine processes the print tickets written in XPS documents.
Selecting [Off] does not process print tickets. Selecting [Standard Mode] uses the
standard mode, and [Compatible Mode] uses the Microsoft-compliant mode to process
print tickets.
NOTE: XPS stands for XML Paper Specification.
LPD Print Queue
Specifies the LPD print sequence. If [Job Submission Order] is selected, [Receiving
Buffer - LPD] under [Allocate Memory] is automatically set to [Spool to Hard Disk].
To Next Page
Loading...
Need help?
General
