Xerox 5222 - Page 197

Properties
197
Services Printing
(continued)
Language Emulation (continued)
- Collated: Allows you to specify whether to collate
the output.
- Offset Stacking: Allows you to select the offset
method.
- Staple: Allows you to select the stapling method.
- Image Enhancement: Allows you to specify
whether to enable or disable image enhancement.
- Resolution: Allows you to select output resolution.
- Bypass Tray - Wait User: Allows you to specify
whether to enable/disable this feature when Tray 5
(Bypass) is selected.
- PostScript Paper Supply: Allows you to select how
PostScript files created by UNIX applications are
printed.
PCL – Allows you to configure the settings when PCL
is enabled.
PCL:
• Font Pitch – Allows you to specify the font pitch
between 6.00 and 24.00 points in 0.01 point
increments.
• Font Size – Allows you to specify the font size
between 4.00 and 50.00 points in 0.25 point
increments.
• Font Name – Allows you to select the required font
from the list of fonts available.
• Symbol Set – Allows you to select the desired
symbol set from the list of symbol sets available.
• Lines Per Page – Allows you to specify the page
length (printing area) of one page.
• Treat "LF" as "CR + LF" and "FF" as "CR + FF" –
Allows you to enable or disable carriage return and
line feed, and also carriage return and form feed, for
the PCL mode.
• Treat "CR" as "CR + LF" – Allows you to enable or
disable carriage return and line feed for the PCL
mode.
• Paper Supply – Allows you to select the paper tray.
• Output Size – Allows you to select the paper size.
• Paper Size (Bypass) – Allows you to select the
paper size for Tray 5 (Bypass).
• Custom Paper Size: Width X – Allows you to specify
a paper size width.
• Custom Paper Size: Length Y – Allows you to
specify a paper size length.
• Output Destination – Allows you to select the
destination for your output.
Feature Setting items