Properties
199
Services Printing
(continued)
Language Emulation (continued)
- Quantity: Enter the number of sets to print when
stored jobs is selected for Print Quantity Setup.
- 2 Sided Printing: Allows you to select whether to
print on both sides of paper.
- Origin: Allows you to specify the origin of the
coordinates.
- Image Orientation: Allows you to select the
orientation of the document.
- Multiple-Up: Allows you to specify the settings for
Multiple-Up.
- Zoom: Allows you to specify the zoom ratio.
- Independent Y%: Allows you to specify the Y%
between 25 and 100%.
- Independent X%: Allows you to specify the X%
between 25 to 100%.
- Up/Down Adjustment: Allows you to specify a
value between -250 and 250 mm (-9.8–9.8 inches)
to adjust the vertical position.
- Left/Right Adjustment: Allows you to specify a
value between -250 and 250 mm (-9.8–9.8 inches)
to adjust the horizontal position.
- Paper Margin: Allows you to specify a value
between 0 and 99 mm for the paper margin.
- Collated: Allows you to specify whether to collate
the output.
- Staple: Allows you to select the stapling method.
- Image Enhancement: Allows you to enable or
disable image enhancement.
- Bypass Tray - Wait User: Allows you to specify
whether to enable or disable this feature when
Tray 5 (Bypass) is selected.
Feature Setting items
To Next Page
Loading...
