7 CentreWare Internet Services
204
Services Network
Scanning
General
Allows you to set up general information for the
Network Scanning service.
Network Scanning:
• Confirmation Sheet – Allows you to select whether
or not to print a confirmation sheet. When enabled, a
sheet showing the success or failure of a job will be
printed.
• Localization – Displays the type of measurement:
inches or millimeters.
Distribution Templates:
• Maximum Number of Job Templates – Displays the
maximum number of job templates.
• Refresh Start Time – Allows you to set the time the
machine will retrieve templates from a server and
store a copy on the machine for viewing from the
control panel.
Template Distribution Repositories:
• Login Source – Select whether to prompt user login
on the machine’s control panel.
Job Log:
• Optional Information – Specify whether user names
and/or domains are to be included with job logs.
File Repository Setup
Allows you to view and modify the file repository on the
remote pool server.
Default File Destination – Allows you to specify the
default file destination for scanning. Click the [Edit]
button to edit the following settings for the default file
destination.
• Friendly Name – Give a name to the file repository
using up to 64 characters.
• Protocol – Select a transfer protocol from [FTP],
[Netware], [SMB], [HTTP], and [HTTPS].
• Host Name/IP Address & Port – Enter the host
name/IP address and post number of the transfer
protocol. This appears only when [FTP], [SMB],
[HTTP], or [HTTPS] is selected in [Protocol].
• Validate Repository SSL Certificate - Place a check
mark into this check box to validate the repository
SSL certificate. This appears only when [HTTPS] is
selected in [Protocol].
Feature Setting items
To Next Page
Loading...
