Adjusting the Color Shift
If you have a color original, you can adjust the hue of the copy colors.
Note
This feature is only available when the output color is set to Auto Detect or Color.
To adjust the color shift:
1. Touch Copy on the touch screen, then touch the Image Quality tab.
2. Touch Color Shift. The Original Color bar represents the colors of the original
document. The Copy Color bar represents the copy colors.
3. Touch one of the five buttons from Minus to Plus to select the desired color shift.
4. Touch Save.
Layout Adjustments
Use the Layout Adjustment tab to change the following settings:
• Book Copying
• 2-Sided Book Copying
• Specifying the Original Size
• Erasing the Edges of a Copy
• Shifting the Image
• Rotating the Image
• Inverting the Image
• Specifying the Orientation of the Original
Book Copying
When copying a book, magazine, or other bound document, you can copy either the left
or right page, or both pages onto a single sheet of paper.
You must use the document glass to make copies from books, magazines, or other bound
documents. Do not place bound originals in the document feeder.
Note
This feature and 2-Sided Book Copying cannot be activated simultaneously.
Note
Non-standard size documents will not be separated into two pages accurately.
To copy pages from a book or other bound document:
1. Touch Copy on the touch screen, then touch the Layout Adjustment tab.
2. Touch Book Copying. In the next screen, touch On.
Xerox
®
Color 550/560/570 Printer7-10
User Guide
Copying
To Next Page
Loading...
Need help?
General
