Note
A message will display and the machine will not operate if the right cover is open even
slightly.
Empty the Punch Waste Container
The UI displays a message indicating when it is time to empty the Punch Waste
Container.
Caution
Only remove the Punch Waste Container while the system is powered ON. If you switch
off the power when emptying the container, the machine cannot detect that the
container was emptied.
1. Make sure that the machine has stopped printing.
2. Open the Right Cover on the finisher.
3. Pull the container out of the finisher ( R4).
4. Discard all the punch scraps in an appropriate container.
Xerox
®
Color 550/560/570 Printer13-14
User Guide
Standard/Booklet Maker Finisher
To Next Page
Loading...
