Installing the Drivers and Utilities for Macintosh
To access all features of the printer, you must:
• Install the printer and scan drivers
• If required, add the printer
Before installing drivers, ensure that the printer is plugged in, switched on, connected
to an active network and has a valid IP address.
Installing Printer and Scan Drivers
Note
The printer and scan drivers both install at the same time.
To install the printer and scan driver:
1. Insert the Software and Documentation disc into your computer’s CD or DVD drive.
If the Software and Documentation disc is not available, download the latest driver
from www.xerox.com/Support&Drivers
2. Open the Mac folder, then open Mac OS 10.5 Universal PS folder.
3. Open Xerox Color 550_560_570 XC CD.dmg.
4. Open Xerox Color 550_560_570 XC CD.
5. Click Continue three times.
6. Click Agree to accept the License Agreement.
7. Click Install.
8. Type your password, then click OK.
9. If the printer does not appear in the list of discovered printers: Click Manually enter
the printer’s name or address at the top of the window. Type the address or name
of the desired printer, then wait for the computer to find the printer. If the IP address
of the printer is not known, refer to Finding The Printer’s IP Address. Click Continue.
10. Click OK to accept the print queue message.
11. If required, select the check boxes to Set Printer as Default and Print a Test Page.
12. Click Continue, then click Close.
13. From the Apple menu, open System Preferences, then open Print + Fax.
14. Click the Printing tab, click the printer in the list, then click Printer Setup.
15. Click Installable Options, then confirm the options installed on the printer are
displayed.
16. If changes are made, click Apply Changes, close the window, then quit System
Preferences.
The printer is now ready to use.
Xerox
®
Color 550/560/570 Printer4-8
User Guide
Installation and Setup
To Next Page
Loading...
Need help?
General
