EasyManuals Logo

Xerox Color 550 User Manual

Xerox Color 550
274 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #229 background imageLoading...
Page #229 background image
1. No staple
2. Bent staple
3. One side of staple rising up
4. Staple bent in reverse direction
5. Flattened staple
6. Entire staple rising up
7. Staple rising up withcenter pressed in
If the output is stapled as shown in the figure above, contact our Customer Support
Center.
Note
Depending on the type of paper that is being stapled, the stapled nails may be bent. If
the bent nails are stuck inside the machine, they may eventually cause paper jams.
Remove the bent staple when opening the staple cartridge cover. If you do not remove
the bent staple, a staple jam may occur as a result. Use the staple cartridge cover only
when removing the bent staple.
Staple jams in the standard staple cartridge
Note
Always check inside the finisher for any individual staples or staple remnants.
1. Make sure that the machine has stopped printing.
2. Open the Right Cover on the finisher.
13-33Xerox
®
Color 550/560/570 Printer
User Guide
Standard/Booklet Maker Finisher

Table of Contents

Other manuals for Xerox Color 550

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox Color 550 and is the answer not in the manual?

Xerox Color 550 Specifications

General IconGeneral
Print Resolution2400 x 2400 dpi
Monthly Duty Cycle300, 000 pages
Duplex PrintingAutomatic
Supported Operating SystemsWindows, Mac OS, Linux
ConnectivityUSB 2.0, 10/100/1000Base-T Ethernet
Supported Media Typeslabels, envelopes
Paper SizeA4, A5
Printer TypeLaser
Print SpeedColor: Up to 50 ppm; Black: Up to 55 ppm

Related product manuals