Xerox Color 550 User Manual

Power Cord
Avoid the potential of electrical shock by ensuring that the printer is grounded properly.
Electrical products can be hazardous if misused.
• Use the power cord supplied with your printer.
• Plug the power cord directly into a properly grounded electrical power outlet. Ensure
that each end of the cord is connected securely. If you do not know if an outlet is
grounded, have the outlet checked by a qualified electrician.
• Do not use a ground adaptor plug to connect the printer to an electrical outlet that
does not have a ground connection terminal.
• Verify that the printer is plugged into an outlet that is providing the correct voltage
and power. Review the electrical specification of the printer with an electrician if
necessary.
• Do not unplug or plug the power cord while the printer is turned on.
• To avoid electrical shock and damage to the cord, grasp the plug when unplugging
the power cord.
• The electrical outlet must be near the printer and must be easily accessible.
• Do not use an extension cord or power strip.
• Do not use a ground adapter plug to connect the printer to an electrical outlet that
does not have a ground connection terminal.
• Do not place the printer in an area where people might step on the power cord.
• Do not place objects on the power cord.
• Replace the power cord if it becomes frayed or worn.
The printer must be turned off before removing the power cord. For instructions on
turning the printer off, refer to Turning the Printer Off.
The power cord is attached to the printer as a plug-in device on the back of the printer.
If it is necessary to disconnect all electrical power from the printer, disconnect the power
cord from the electrical outlet.
Emergency Power Off
If any of the following conditions occur, turn off the printer immediately and disconnect
the power cable from the electrical outlet. Contact an authorized Xerox Service
Representative to correct the problem:
• The printer emits unusual odors or makes unusual noises.
• The power cable is damaged or frayed.
• A wall panel circuit breaker, fuse, or other safety device has been tripped.
• Liquid is spilled into the printer.
• The printer is exposed to water.
• Any part of the printer is damaged
1-3Xerox
®
Color 550/560/570 Printer
User Guide
Safety

Xerox Color 550 Specifications

General

Print Resolution	2400 x 2400 dpi
Monthly Duty Cycle	300, 000 pages
Duplex Printing	Automatic
Supported Operating Systems	Windows, Mac OS, Linux
Connectivity	USB 2.0, 10/100/1000Base-T Ethernet
Supported Media Types	labels, envelopes
Paper Size	A4, A5
Printer Type	Laser
Print Speed	Color: Up to 50 ppm; Black: Up to 55 ppm